sturglgo-2.jpg (8299 bytes)
QuicTurn™    Worlds finest Lubricant and Solvent
Home Pictures Uses MSDS Testimonies FAQ'S Order

Testimonials

 

C. T. Hayes, retired Lieutenant Rocky Mount Police Department and Rocky Mount Firearms Instructor for twenty-five years.  I have used many top brand solvents, gun oils and lubricants.  I recently had an opportunity to use gun lubricant named QuicTurn.  I had some jamming problems with my 9-mm Beretta.  I decided to try QuicTurn.  To my amazement, I only used one drop in the slide action.  I had no more jams that day and decided any thing this good would work on my other hand and long guns.  Being a prior firearms dealer, over the years I have acquired many firearms.  I now use QuicTurn on all my firearms and have used it recently to free up the action on a friend’s AR-15 that he just purchased.  I recommend QuicTurn for any and all your firearms regardless of the type of action.

Lt. C. T. Hayes RMPD Retired 4-8-05

 

 

lshat.JPG (6816 bytes)

 

Larry Sutphin, Chesapeake, Va
I live on a fresh water lake here in Chesapeake, Va.
I have bought many fishing rods over the years and some are quite old and hard to turn.
One application of Quicturn did the trick!
They work like new....thanks to Quicturn!

 

 

 Carson Weaver.JPG (12125 bytes)

QuicTurn is good stuff. 

I tried it on wood and I liked the finish.

Carson Weaver

Rocky Mount, NC

 

 

 

 

 



I had heard that QuicTurn was good at penetrating frozen bolts, so I got a bottle to try on my idler pulley from my lawn mower that had been frozen two years.  I had previously used WD-40 on it to try to free it but could barely turn it with a wrench.  I couldn’t believe it, after two drops of QuicTurn on the pulley, and before I got one full turn, I could spine it freely with my fingers.

Alvin Bone  Elm City, NC

 

 

 




I have used QuicTurn on my firearms and for finishing the wood on my gun cart and found this product to exceed my expectations.

Father Time

AKA John E Clark   Wilson, NC

 

 

 

 

Mike Collins.JPG (13263 bytes)As a hobby shop owner I work on a lot of nitro powered engines.  They use a fuel mixture with castor and synthetic oils.  The castor gets very gummy with time and this product does an excellent job of dissolving the gunk and making engines turn free again.  Also works great on miniature ball bearings.

Mike Collins  Hobby Corner

1121 S Wesleyan Blvd, Rocky Mount, NC 27803 (252) 977-1685

 

 

 



Why I recommend QuicTurn oil.    Recently I purchased a 1998 Blazer to work in.  It had a terrible squeak in the rear window latch.  My first thought was to apply WD-40.  Which I did.   The squeak went away for about one day.   Then to my surprise it was back.  A friend of mine had given me some QuicTurn oil and asked me to try it.  So I thought, why not on the Blazer squeak.  I applied it to the latch and it has not squeaked since.  I’m a believer in QuicTurn, better than WD-40.  Works equally great as a gun cleaning oil.  Also tried it on wood, makes a great wood finisher product.  I would recommend it to everyone, give it a try, you will use it often.  Larry Wolfingbarger Mt. Airy, NC

 

 


 

I do a lot of sewing.  Recently my sewing machine was sluggish so I used QuicTurn on it.   It now runs so smooth, like a new machine.   I have never seen oil work so well.

R Bradshaw

Racine, WV

 

 

 

Order now!    Try our new Toll Free Number!! 1-866-532-6748  

Sturges Sportswear Inc
7752 NC 48, Battleboro, N.C., 27809
252-446-0096     Fax 252-977-3932   

 

9-5 EST Monday--Saturday and 12 -5 EST Sunday

 

Back to Sturges Sportswear web site | Evertize Shopping Mall

Email us

Top